Use CasesSupply chain assurance

Trust supplier firmware because you tested it

Metalware tests a supplier's compiled firmware from the binary alone and traces each defect to its root cause, so you can validate each delivery or send it back with evidence.

Hard to verify

Supplier firmware is hard to judge from the outside

Third-party firmware often comes without source code, but once the product ships under your name, a supplier's defect is yours.

  • No source to reviewSuppliers often deliver binaries only, and source access is hard to get written into a contract.
  • Every delivery is a new binaryEach update or supplier change is a new binary to test, and by hand one binary takes weeks of expert work.
  • Findings get disputedA finding without a root cause or evidence turns into a debate about whether the bug is real.

What Metalware enables

Test every delivery yourself before you accept it

Analysis
Upload each binary as it arrives. Metalware analyzes it automatically, with no source code or help from the supplier needed.
Summary
A plain-language overview of what the device does and what it connects to.
Defects
Found in the binary, each traced to its root cause.
Assurance
Trust your firmware supply chain without relying on vendor attestation.

In an older Zephyr sample, Metalware found a known flaw 42 seconds into fuzzing.

Metalware firmware summary for an older Zephyr sample: a written overview of a Zephyr 2.2 Bluetooth Low Energy peripheral, and a connection diagram of the STM32L475VGT6 with its SPBTLE-RF radio module on SPI3 and GPIO lines and a UART debug console.

Evidence and POCs

Evidence you need to fix problems quickly

Metalware provides a PDF report, root cause, trace and POC, so your suppliers can verify and fix issues quickly.

Keep reading

Questions

Do I need vendor cooperation?

No. Metalware tests the compiled binary on its own, with no source code, documentation or help from the supplier. You bring the supplier in once there is something to fix, with the root cause and evidence behind each finding.

What if the vendor is gone?

Metalware needs only a copy of the binary, so inherited firmware with no source and no vendor support can still be tested.

Can someone outside our team check a finding?

Yes. Give them each defect's PDF report, POC and trace, and run the POC in Metalware to show the fault. Static and reliability findings each show the code behind them and why it can fail.

Test your supplier firmware